Caring for the SaluSpa hot tub water chemistry can be made easier with the Chem Connect dispenser. This hot tub accessory changes how tub users manage chlorine tablets, bromine tablets, and active oxygen tablets for their spas. Knowing where the chem connect goes and how to use chem connect dispensers makes water care simple with consistent free chlorine levels. This guide covers everything from chem connect saluspa placement to effective chlorine level maintenance.
How Does the Chem Connect Dispenser Work?
The ChemConnect system dispenser pays out hot tub sanitizing chemicals through a floating system. This spa dispenser employs the following components:
- Floating Chamber: This chamber holds the bromine or chlorine tablet allowing for συνέχεια chemical release.
- Adjustable Flow Vents: This component allows for the custom control over the rate of tablet dissolution.
- Secure Lid: This system holds the tablet in for safe operation and prevents tablet spillage.
- Chemical Contact Surface: This section of the device touches all the water to ensure it all gets used and to maximize the water exposure for it to be evenly distributed.
The dispenser attaches to a SaluSpa filter cartridge housing section, where a filter connects to the spa wall. This placement offers ideal water circulation through the system, allowing for even dissolution of the water chem while maintaining consistent levels of bromine or chlorine for the whole duration of your hot tub use.
Ideal Location For The Chem Connect SaluSpa
The following is a guide for correct placement of the ChemConnect SaluSpa user interface:
- Locate the Filter Housing: Externally find the Spa Salu filter.
- Identify the Connection Point: Locate the filter cartridge holder assembly.
- Attach the ChemConnect: Clipped the ChemConnect filter intake
- Verify a Secure Fit: The ChemConnect should not wiggle.
- Add Sanitizer Tablets: Appropriate sanitize the water with bromine or chlorine.
- Adjust Flow Settings: The vents should easily adjust based on the expected usage.
The ChemConnect SaluSpa unit must be situated on the point where water enters the filtration system. This allows sanitised water to circulate effectively with the desired free chlorine residual in the water between 3-5 ppm for water disinfectant efficiency.
Read More: SaluSpa Water Care: Chemicals Guide for Clean Safe Water
Benefits of Using Chem Connect For Pool Chem Management
Placement of automation within a pool may be appropriately placed as per these benefits:
- Automated chemical dosing – Eliminates hassle of manually dosing chemicals every day
- Constance of water quality – automatically controls free chlorine
- Cost-efficient – Less chemical use through controlled release
- Usability – Easy setup and no technical knowledge
- Flexible compatibility – Chlorine tablets, Bromine tablets, active oxygen tablets
- Time-efficient – More relaxing and less maintaining
Comparison of sanitizer options:
| Sanitizer Type | Dissolution Time | Ideal For | Active Oxygen Compatibility |
| Chlorine Tablets | 3-5 days | Regular use | No |
| Bromine Tablets | 5-7 days | Sensitive skin | No |
| Active Oxygen | 1-3 days | Chemical-sensitive users | Yes |
Maintaining Ideal Chlorine or Bromine
The secret of water chemistry is:
For Chlorine:
- Ideal range is within 3-5 ppm free chlorine levels
- Test water needs 2-3 times a week
- ChemConnect vents should be adjusted and as tablets are
- Refill tablet dispensers once they are 1/4
For Bromine:
- Ideal range is within 4-6 ppm
- Test water before every use
- Bromine tablets take much longer to dissolve
- Highly recommended for indoor spas that are covered
The Saluspa system ChemConnect system adapts to using both sanitizer options, as they both have plenty of versatility to suit different preferences. Always make sure that the spa dispenser is still fitted during the filter cycle to ensure that the chemicals are being released evenly.
CHEMCONNECT COMMON ISSUES
Explore the most common ChemConnect problems users face, from app connectivity
Dispenser Loses Sanitizer Too quickly
if it is set too high. Water flow rate is too high if it flows too quickly and if it is too low, of course. All of the tablets will dissolve rapidly. Adjust the flow to achieve a steady trance.
Chem Connect is Losing Tablets Too quickly
Tablets will disappear every 4 to every 7 days and this is the expected duration between changes.
How to Resolve Common Chem Connect Issues?
Check if chemconnect looses tabs too quickly. If this is the case, the flow rate may be set too high. If no flow is noted at the chemconnect outlet, then it will already be too low. Achieve a stable slow liquid flow to the outlet.
Hypo Chlorination
The circulation pump will deposit a high rate of active oxygen while it is running.
Chem Connect is Losing Active Oxygen Tablets Too quickly
Cownwater boxing bandagingInjection non dis burasementSave as tabsLock tabsPriaphem
Chem Connect Losing Tabs Too Quickly
ChemConnect losing tablets too quickly If you use rapid dissolution active oxygen tablets, check if they are fully sealed. A normal non sealed tab is single use. If the circulation pump is not active during the shock treatment, the disbursement will not be achieved.
Un clogger will dissolve slowly in order to facilitate the delivery of disbursement.
Cloudy Water
ChemConnect will not turn cloudy within the first 7 days. If cloudy water is discovered shortly after, use a hyphen to incest shock treat the water.
Chem Connect Loses Active Oxygen Tablets Too quickly
Chem Connect losing tabs too much. Check the water flow rate through the chemconnect. If blocks are floating it is too low.
ChemConnect will not turn cloudy within the first 7 days. If cloudy water is discovered shortly after, use a hyphen to incest shock treat the water.
Chem Connect cloudy water
The circulation pump will deposit a high rate of active oxygen while it is running.
Chem Connect cloudy water
If the chemconnect is cloudy, the active oxygen will be depleted slowly. to turn it back to a clear
Chem Connect loses active oxygen tablets too quickly
Boost will resolve common chemconnect issues.
FAQs
Here are some frequently asked question given Below:
Where Exactly Does the Chem Connect go in a SaluSpa Hot Tub?
The ChemConnect is designed to easily clip onto the filter cartridge housing at the point where water flows into the filtration system so that it can distribute the chemicals.
Can I Use Both Chlorine and Bromine Tablets in Chem Connect?
You must not mix different types of sanitizer. Stick to either chlorine tablets or bromine tablets for the whole season.
How Often Should I Refill the Chem Connect Dispenser?
Check the dispenser every week and refill it as soon as the tablets go down to 1/4 full. How often the dispenser should be refilled depends on how often the hot tub is used. If using the tub every day, the dispenser will need to be refilled more often.
Does Chem Connect Work with Active Oxygen Tablets?
Yes. You should keep in mind that active oxygen tablets do dissolve more quickly than the traditional sanitizers so you may need to adjust the vent settings and keep a closer eye on the free chlorine level.
What if my Chem Connect keeps Falling Off?
Just make sure that the filter housing is completely clean and dry before attaching it. If the clip is broken, you will need to contact the company to get other parts so that it can be attached properly.
Conclusion
Knowing the location of the chemconnect system in hot tub setups allows spa maintenance to become simple and efficient. The right position of the chem connect saluspa on the filter housing guarantees consistent sanitizing regardless of whether you use chlorine tablets, bromine tablets, or active oxygen tablets.
With the automatic maintenance of the free chlorine levels that this innovative spa dispenser offers, you can concentrate on relaxing instead of on pool chem management. Enjoy maintenance-free hot tub use and crystal-clear water by properly operating your hot tub chemconnect system today.
About Author
