Changing SaluSpa filters is key to providing good quality water maintenance to your hot tub. Routine filter replacement is vital to good water quality and optimizes performance of your equipment. Also, it prolongs the lifespan of equipment and can save you the expense of making costly repairs and the health risks that can accompany them.
Knowing how often to change a SaluSpa filter along with cleaning techniques and maintenance schedules is critical to ensuring your spa stays operational and in good working order all year. This guide is designed to help you with that knowledge.
Hot Tub Filter Replacement
There are a number of factors that determine how often your hot tub filter should be replaced. The average hot tub filter should last between 12 and 24 months. However, the usage of the hot tub filter system can greatly affect this average lifespan.
| Factor | Impact on Filter Life | Recommended Action |
| Daily Usage (4+ hours) | Reduces lifespan by 40% | Replace every 8-12 months |
| Weekly Usage (2-3 times) | Standard wear | Replace every 12-18 months |
| Occasional Use (monthly) | Minimal wear | Replace every 18-24 months |
| High Bather Load | Accelerates debris buildup | Increase cleaning frequency |
The filter fibers within your hot tub system have to deal with a variety of chemicals that can cause them to become clogged. Filtration problems can happen on a timely basis when you don’t change filters on hot tub systems regularly. That’s why it is critical to the water circulation of the system to change filters on hot tub systems regularly.
Read More: SaluSpa Water Care: Chemicals Guide for Clean Safe Water
How To Properly Clean Hot Tub Filters?
Cleaning your hot tub filter on a regular basis is important. If you do not clean your hot tub filter, you increase the need to replace it more often. A regular cleaning routine will help reduce the oil buildup on the filters, and help protect the filter media that is used to trap fine debris and oils from the hot tub water.
Here is a little routine you can do to make this a bit easier:
- Get your filter cartridge and hose it off. You can do this with a regular hose at a 45-degree angle to the filter.
- Get a cleaning solution and soak your filters. This will take in the solution for 8-12 hours. You can do this quarterly to ensure the filters are in the best shape possible.
- Grab a filter comb and get all the debris that is stuck between the pleats.
- Inspect the filter to make sure that it is in working condition. Look for things like holes, and crushed pleats, as well as general wear on the fabric.
- Once the filter is done air drying, feel free to slip it back into the hot tub.
To keep from getting overwhelmed, we recommend that most people working with an average hot tub use bi-weekly rinses. If you are a heavy user of the hot tub, a quick water quality inspection is a must and we recommend doing a weekly rinse.
How To Know When To Replace Your Hot Tub Filter?
It is up to the owner to monitor how often they are using the hot tub and how quickly the filter gets used up. Knowing your personal usage will help you determine a good routine for replacing the filters so you are not doing it too often, or too little.
Filters Replacement Schedule
- Frequent Users – 4-7 days a week – Every 6-12 months replacement
- Moderate Users – 3-4 days a week – Every 12-15 months replacement
- Occasional Users – 1-2 days a week – Every 15-18 months replacement
- Seasonal Users – Every year when the season starts
- Commercial Spas – Every 3-6 months replacement
Primary marker used to determine the replacement filter needed is a lack of clarity in the water after filtering as well as maintaining a proper chemical balance. The SaluSpa hot tub filter replacement may become necessary when cleaning the filter does not restore lost filtering capacity.
Replacement SaluSpa Filters
SaluSpa models vary in the types of filters needed. Each model must be replaced with filters of the same kind. Incorrect filters may lead to insufficient filtration as well as the nullification of any warranties.
| SaluSpa Model | Filter Type | Replacement Frequency | Cost Range |
| Miami/Vegas | Type VI Cartridge | 12-16 months | $15-$25 |
| Helsinki | Type VI Twin Pack | 10-14 months | $25-$35 |
| Paris | Type S1 Cartridge | 12-18 months | $12-$20 |
| Palm Springs | Type VI Standard | 12-16 months | $15-$25 |
It is imperative to use OEM filters if not certified compatible filters. Generic filters may fit physically but cause water to flow freely while contaminants may pass through as well.
Changing Hot Tub Filters
Following the proper SaluSpa filter replacement guides makes sure filters do not damage system props when swapped.
Complete Replacement:
- First step will always be to turn off the hot tub power at the breaker panel.
- Next remove filter housing cover by twisting it counterclockwise.
- Then to extract the old filter simply pull it straight up.
- Then clean the filter housing cavity using a damp cloth.
- Next check the O-rings for damage, then apply silicone lubricant.
- Now insert the new filter firmly until it is fully seated.
- Then be sure to verify the filter cartridge is aligned correctly before securing it.
- Now to replace the housing cover, and restore power.
- Run the circulation pump for thirty minutes.
- Then test the water chemistry and make the necessary adjustments.
Post Installation Monitoring:
Post installation monitoring will help prevent air lock issues. If you notice the flow seems restricted, then remove and reseat the filter to ensure it is properly in place.
Jetted Tub Filter Replacement
Jetted tub systems have their own unique challenges including oils, soaps, and body lotions which all accelerate the degradation of the filter.
Maintenance Differences:
- A 24 hour pre-soak in clean water should be done for new filters before installation.
- For jetted bathtubs, increase the rinsing frequency to weekly.
- Monthly, use enzyme based cleaners to help dissolve the organic buildup.
- Quarterly inspect the jet housings for debris.
- Filters should be replaced 25% more than what is done in standard hot tubs.
The combination of hotter temperatures and personal care products creates difficult conditions. The impact of water quality on filters is jetted tubs is especially bad requiring a very vigilant maintenance schedule.
FAQs
Here are some frequently asked question given Below:
How Do I know When my Hot Tub Filter Needs Replacement?
Replace when filter shows physical damage, persistent cloudiness occurs despite cleaning, or after 12-24 months of use.
Can I Clean my Filter Instead of Replacing It?
Regular cleaning extends the filter’s life, but it cannot restore exhausted filters. With a filter’s maximum life span, replacement will be needed regardless.
What Happens if I Don’t Change my Filter on Schedule?
Dirty filters tend to further decrease circulation, encourage heightened usage of chemicals, add strain to pump motors, and may allow bacteria to develop and thrive in the tub.
Are Expensive Filters Worth the Cost?
Top tier filters tend to be more expensive because they last longer. Their effectiveness at filtering cheaper the product makes it worth it.
How Many Spare Filters Should I keep?
2 spare filters should be on hand to allow 1 to dry completely while the other one is in use.
Conclusion
Knowing how frequently to change a SaluSpa filter helps to keep good water quality and allows things to last longer. Hot tub filter replacement, and hot tub filters cleaning, are needed to keep the hot tub working fine all year. How often you use the hot tub, and how often you clean it, should determine how often you change the filters.
You will have clean water, and ease of mind. It will lower the costs of maintenance. It will reduce overall stress and keep you relaxed. You should change your filters spa replacement tips. Most importantly, you should hot tub maintenance set to change the filters regularly.
About Author
