Knowing how to clean a SaluSpa hot tub pump is essential to maintaining your backyard inflatable hot tub care routine. This is because a clean pump ensures effective water circulation and prevents your hot tub water from becoming cloudy. In turn, this prevents your hot tub from becoming damaged, and keeps your pump cleaning upkeep from becoming an arduous task. In this guide, we will cover some fundamental hot tub plumbing cleaner techniques.
These include the use of vinegar solutions for deep cleaning, and hot tub systems as a whole, allowing you to fully grasp the routine upkeep of cleaning an inflatable hot tub and maintaining it.
How to Clean Inflatable Hot Tub Pump?
Knowing how to clean an inflatable hot tub pump and how to maintain it will save you from a potentially costly pump replacement and ensure you have crystal-clear water. This is important, and here is what you need to know.
Essential Cleaning Steps:
- Following the manufacturer guidelines, remove the pump unit from your SaluSpa.
- Inspect the intake and outflow valves of the pump to ensure no debris is acquired.
- Get a soft brush and use it to clean the outer surfaces of the pump.
- Check the filter cartridges, and replace them if excessively dirty.
- With the proper hot tub pipe cleaner solutions, flush the internal components.
- Reassemble the pump, and make sure all connections are secure, and watertight.
Cleaning your inflatable hot tub pump will make sure your pump is functioning properly. This is a necessary task to ensure system failures, and optimal water flow is stabilized. During active use of the hot tub, this pump cleaning should be done every two to three weeks, and should also be done before the hot tub is placed into storage for storage preparation.
How to Clean a SaluSpa Pump with Vinegar?
If you own a SaluSpa, cleaning the pump should be done on a regular basis to ensure the pump is operating at maximum efficiency. One of the best and most simple cleaning solutions is regular white vinegar.
The vinegar will dissolve and soften all the mineral deposits and scale build up on the pump. White vinegar is a natural cleaning agent, and is a safer alternative to more powerful and harsher cleaning chemicals. Always remember to unplug the pump before cleaning.
The time to soak each component of the pump varies. Below is a summary of the exact cleaning ratio of vinegar to water needed.
Read More: SaluSpa Hot Tub Pump Cleaning & Maintenance Tips
| Pump Component | Vinegar to Water Ratio | Soak Duration |
| Intake Valve | 1:2 vinegar/water | 60 minutes |
| Pump Housing | 1:1 vinegar/water | 30-45 Minutes |
| Internal Pipes | Full strength vinegar | 1 hour |
| Filter Cartridges | 1:3 vinegar/water | 2-4 Hours |
To use the vinegar to clean the pump, follow the steps below.
- Prepare the cleaning solution.
- Let a component of the pump soak for the requested time.
- Take a soft scrubber and scrub off any stubborn deposits of mineral build up.
- Rinse each component of the pump thoroughly.
- Let the pump parts air dry.
Lastly, cleaning the pump with white vinegar is the most environmentally friendly and safe option for the spa and all of its systems. When cleaning a spa, you should also consider cleaning the pipes. Cleaning deep into the plumbing is often neglected and is equally important.
Hot Tub Pipe Cleaner Methods
Discover effective techniques to flush and sanitize your hot tub’s plumbing system.
Tub Therapy Pipeline Cleaning Mop:
- Commercial self warm spa pipe cleaning remedy (read directions first)
- Do-it yourself vinegar flush for small maintenance
- Organic ultra-bio cleaners removal
- Dissolve citric acid solutions for calcium.
- Oxygen-based cleaners for sanitizing internal pipings.
Application Technique:
- Remove filters and drain spa until it reaches the desired water level.
- Add pipe cleaner to spa water.
- Run the pump at full power for 15 to 20 minutes.
- Let the solution sit for the recommended amount of time.
- Drain the spa and refill the entire spa with new water.
- Run pumps again to flush the residual cleaner.
Additionally, if these routines are done every three months, it stops the system from clogging and keeps the water clear from the chemical floater.
SaluSpa Pump Maintenance Schedule
Regular maintenance is important to hot tubs in order to prevent emergency repairs and increase longevity. Use this checklist.
| Maintenance Task | Frequency | Time Required |
| Pump inspections (Visual) | Once a Week | 5 minutes |
| Filter cleaning (Cartridge) | Once every 2 weeks | 15 minutes |
| Pump cleaning | Once a month | 20 minutes |
| Pipe system cleaning (Deep) | Once every 3 months | 45 minutes |
| Pump cleaning (Total) | Once a year | 90 minutes |
Weekly Maintenance:
- Listen for any odd pump noises.
- Make sure the water is flowing properly from the jets.
- Make sure to check the hot tub water for any chemical imbalances.
- Remove any debris from the pump intake area.
Monthly Tasks:
- Check for any corrosion on the electrical connections.
- Make sure the GFCI safety switches are working.
- Remove and clean the filter baskets.
- Check for leaks on the pump seal.
Having a system like this in place lowers the amount of downtime on your inflatable backyard hot tub and increases the value of your time and effort.
Preventing Cloudy Hot Tub Water Through Pump Care
The water in your hot tub will be cloudy due to the water not being properly maintained. The hot tub water will also be cloudy if the pump is not working in order to properly treat the water.
Prevention Strategies:
- Prevent pump filters from becoming too saturated by cleaning them frequently.
- Regularly test the hot tub water to test the water chemistry so it stays within the proper parameters.
- Make sure to run the pumps for the appropriate amount of time every day for water circulation.
- Take care of small problems right away before they turn into bigger issues.
- When filling the hot tub, to avoid bringing in additional contaminants, use pre-filters.
- To minimize the amount of body oil into the water, be sure to shower before entering the hot tub.
Pump-Related Water Quality Factors:
- Particles in the water will settle to the bottom if there is not enough circulation.
- If filters are dirty, the contaminants will be returned into the water.
- If there are clogged pipes, the chemicals will not be able to spread out into the water.
- If an impeller is worn down, the filtration will be less efficient.
- If there are air leaks, the pump pressure will decrease and the pump will perform poorly.
To ensure water is clear and inviting for soaking, these factors can be diminished through cleaning the hot tub frequently.
FAQs
Here Are Some frequently asked question are given Below:
How Often Should I Clean my SaluSpa Pump?
For the best performance, it should be cleaned externally at least once a month, and deep cleaning should be done once every three months.
Can I Use Bleach Instead of Vinegar?
Bleach is not recommended, as it can cause damage to the pump seals. Vinegar is a safer and just as effective alternative.
Why is my Pump Making Loud Noises?
Pump noise issues are usually caused by low water levels or debris stuck in the impeller.
How do I know when to Replace my Pump?
If the pump is making excessive noise, there are frequent problems with it, or the water flow is low even if it has been cleaned, then it likely needs to be replaced.
Is it Essential to Remove the Pump for Winter Storage?
Of course, pumps for Winter storage and cold winter countries hot tubs or hot tub elements must be thoroughly cleaned and then taken indoors.
Conclusion
Cleaning a SaluSpa pump the right way keeps your inflatable hot tub functional for years to come. Maintenance techniques, namely vinegar solutions or proper hot tub pipe cleaner use, allow you to mitigate damages, stick to budget, and keep the water clear.
The right pump maintenance, along with good, regular hot tub water testing, and a chemical floater, ensures the right spa environment. Take the opportunity to implement this annual hot tub cleaning schedule to maximize the investment and enjoy the water quality that remains pristine.
About Author
